D3-HD with 3 heads (Stationary Table Drill)
- Customer pickup,
- Courier
- In detail
- Installation methodCountertop
Easy Adjustment - No Tools Required
Features
- 5-drilling head capacity
- Stationary table
- Positive gear driven heads
- Hydraulic operation
- Head alignment without use of tools
- Exclusive medical forms drilling capability
- Safety interlock guards
- Drill bit installation and removal without use of tools
Other Similar Products
- D3-HD
- D5-ST
Recommended Optional Productivity Enhancements
- Teflon coated drill bits for coated stocks
- Extra wood drilling blocks
- Electric drill bit sharpener
D3-HD Drill
A long standing tradition with Baum floor-model drills is how easily adjustments can be made. No tools are needed for positioning the heads. Set-up time is greatly reduced since the heads can be moved into position simply by loosening a locking knob by hand, placing the head where needed, and retightening. Drill bits can also be removed and reinserted without tools.
Likewise we build for safety. The safety interlock feature protects the operator by disabling all motors when the guard is lifted. The spindle motor remains inoperative until the guard is lowered. If the safety motor overload breakers interrupt the operation of either the spindle or the hydraulic motors, there is no need to open the electrical box to push a reset switch. They will automatically reset themselves. An overload indicator light is provided on the front conrol panel.
Specifications:1-1/4 in" (3.18CM) center to center minimum distance between holes
Capable of drilled hole sizes using bits from 1/8 to ½ in (3.1 to 12.7cm) diameter
Full 2 inch (5.1cm) high lift capacity
Electrics: 220/1/60 or 220/1/50 or 220/3/60 or 380-415/3/50
Metric/inch scales