Accumulation Conveyors
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Description
Specifications:
Belting: | 2-1/4" wide "high strength" PVC-150 belt. *Note: when slave driving other units, optional 6" wide PVC-120 drive belt must be used on units 20' long and above. |
---|---|
Drive Pulley: | *4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged. |
End Pulley: | 4" dia., crowned, with 1-3/16" dia. shaft. |
Center Drive: | Reversible drive with 24" integral belt take-up. For units under 8'-0" overall length, drive components must be stacked. Consult factory for minimum unit elevation. |
Bearings: | All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. |
Tread Rollers: | 1.9" dia. x 16 ga. steel, model 196S. |
Pressure Rollers: | 1.9" dia. x 16 ga. steel, model 196S. |
Return Rollers: | 1.9" dia. x 16 ga. steel, model 196S, adjustable. |
Speed: | 60 FPM, constant. |
Bed: | 7" x 1-1/2" x 12 ga. channel frame slotted for tread rollers to pop-out. When unit is installed at 7'-0" elevation or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports. |
Squaring Rods: | Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. |
Floor Supports: | SM-6 adjustable 31-1/2" to 43-1/2" TOR. Supports should be lagged to floor. |
Motor Drive: | 1/3 HP, 230/460/3,60 cycle, ODP right angle gear motor. |
Roller Chain: | Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base. |
Contact the seller
Accumulation Conveyors
We recommend to see